10-November-2016
The below article is an old article, after trying out CEC scythe, I have stopped using it now, since more comfortable and internationally used Scythe designs are available now in India...Please visit
http://www.scytheindia.com/
Old Article
Cutting and controlling weed is an important activity in natural farming. I had seen Masanobu Fukuoka carrying a weed cutting tool with a long handle and thought such a long handled tool will be useful for cutting weeds. Fukuoka san carries two such tools, one short handled and one long handled. That tool was called Japanese Kama and later found that a tool called scythe exists which will be useful. See a picture of that tool.
I couldn't find any source in India to buy a scythe so contacted Alexander Vido of scythe works and got one scythe,it works well, but has some problems. It is very sharp and light weight but blade gets damaged when hit a stone or a hard branch which is there here and there through out the farm. Blade was bent,cut and I keep peening, sharpening but thought a bush scythe will be useful in these cases. Importing scythe was costly so finally came across CEC Hyderabad which makes scythes.Thanks to Balaji who gave this information on finding my previous blog post on scythe.
CEC (Centre for Environmental Concern) Hyderabad had imported scythes from Europe and studied it and they make it locally. Contacted Gopal of CEC Hyderabad and he spent the specification as
Stainless steel pipe welded to high quality hardened spring steel cutting blade. The Pipe is 4 ft with 16 mm diameter. The blade is 1.5 mm thickness, 90 mm width and 360 mm in length.
They make it to make the work of women laborers easy since benting and cutting weeds causes health problems (back ache etc) and allergic problems while coming in contact with some weeds.
I transferred 1200/- for this scythe and Mr. Gopal sent it to me. I fitted the scythe and started using it. It was not that smooth since it was little heavier than earlier scythe and also the snath was just 4 feet. According to the scythe experts it should be as tall as the person cuts. So I just put my earlier scythes wooden handle to this scythe and it works well now, even though it is little bit heavy compared to my imported scythe.
I am quite happy with this scythe's edge which is very strong steel and sharp. Hitting branches and small stones are all fine. I still haven't fitted handles for the snath and not really using it the way scythe is being used, since most of the cases there will be in between plants and there is no complete grass area to cut.
So anyone who buys this scythe should experiment a little bit and also fit a new snath. I use the same sharpening stones for making it sharp.
Here are some pictures: The one with steel handle is the scythe from CEC.
The below article is an old article, after trying out CEC scythe, I have stopped using it now, since more comfortable and internationally used Scythe designs are available now in India...Please visit
http://www.scytheindia.com/
Old Article
Cutting and controlling weed is an important activity in natural farming. I had seen Masanobu Fukuoka carrying a weed cutting tool with a long handle and thought such a long handled tool will be useful for cutting weeds. Fukuoka san carries two such tools, one short handled and one long handled. That tool was called Japanese Kama and later found that a tool called scythe exists which will be useful. See a picture of that tool.
I couldn't find any source in India to buy a scythe so contacted Alexander Vido of scythe works and got one scythe,it works well, but has some problems. It is very sharp and light weight but blade gets damaged when hit a stone or a hard branch which is there here and there through out the farm. Blade was bent,cut and I keep peening, sharpening but thought a bush scythe will be useful in these cases. Importing scythe was costly so finally came across CEC Hyderabad which makes scythes.Thanks to Balaji who gave this information on finding my previous blog post on scythe.
CEC (Centre for Environmental Concern) Hyderabad had imported scythes from Europe and studied it and they make it locally. Contacted Gopal of CEC Hyderabad and he spent the specification as
Stainless steel pipe welded to high quality hardened spring steel cutting blade. The Pipe is 4 ft with 16 mm diameter. The blade is 1.5 mm thickness, 90 mm width and 360 mm in length.
They make it to make the work of women laborers easy since benting and cutting weeds causes health problems (back ache etc) and allergic problems while coming in contact with some weeds.
I transferred 1200/- for this scythe and Mr. Gopal sent it to me. I fitted the scythe and started using it. It was not that smooth since it was little heavier than earlier scythe and also the snath was just 4 feet. According to the scythe experts it should be as tall as the person cuts. So I just put my earlier scythes wooden handle to this scythe and it works well now, even though it is little bit heavy compared to my imported scythe.
I am quite happy with this scythe's edge which is very strong steel and sharp. Hitting branches and small stones are all fine. I still haven't fitted handles for the snath and not really using it the way scythe is being used, since most of the cases there will be in between plants and there is no complete grass area to cut.
So anyone who buys this scythe should experiment a little bit and also fit a new snath. I use the same sharpening stones for making it sharp.
Here are some pictures: The one with steel handle is the scythe from CEC.
